Module Type | ATP-60M / ATP-60P | ||||
Maximum Power(Pmax) | 260W | 265W | 270W | 275W | 280W |
Open-circuit Voltage (Voc) | 38.1V | 38.3V | 38.4V | 38.5V | 38.7V |
Optimum Operating Voltage (Vmp) | 30.6V | 30.8V | 30.9V | 31.1V | 31.4V |
Short-circuit Current (Isc) | 9.01A | 9.10A | 9.18A | 9.25A | 9.34A |
Maximum Power Current (Imp) | 8.50A | 8.61A | 8.74A | 8.85A | 8.92A |
Module Efficiency (%) | 15.90% ~ 18.28% | ||||
Power Tolerance | 0~+5W | ||||
Standard Test Environment | Irradiance 1000W/m2, Cell Temperature 25℃,Spectrum AM 1.5 | ||||
Operating Module Temperature |
-40 °C to +85 °C
|
1. Strict quality control meets the highest international standards.
2. High light transmittance and low iron tempered glass, strong aluminum frame uses UV resistant silicon.
3. Based on innovative photovoltaic technology, beautiful appearance and high efficiency.
4. The high-quality, sturdy aluminum frame has passed the mechanical load test of 5400 Pa and the wind pressure test of 2400 Pa.
Independent systems(household,powder supplies for remote areas, remote systems, ete.)and grid-connected photovoltaic power stations(residential,commercial, industrial power supply systems)
1.5BB, 6BB, 9BB Availablec.
2.High output-power: conversation efficiency is 18%-22%.
3. High shunt-resistance: adapt the several environmental conditions.
4.Bypass diode minimizes the power drop by shade .
5.Excellent low light effect .
6.Low breakage rate.
1. Fully comply with certification and regulatory standards.
2. Withstand wind loads up to 2.4KPa and snow loads up to 5.4Kpa. Confirm mechanical stability. Successfully withstand the highest exposure severity levels of ammonia and slat fog. Ensure its performance under adverse conditions.
3. The junction box and bypass diode ensure that the module will not overheat and hot spots.